|
|
| |
Single Compression Glands are used in Regular Climatic Conditions, Which are Weather proof (IP 60). With the Protection of PVC Hood it can be used in Different Areas.
|
|
|
|
|
|
|
| |
1) Cheak Nut, 2) Main Gland Body, 3) Metal Washer (3.Nos), 4) Outer Sheath Rubber, 5) Gland Cover. As all the metal parts are made of brass, as per the Approved Drawing.
|
|
|
|
|
|
|
| |
Type Test Report From Regional Testing Center
as per IS 12943, with IP 60,
No. RTC / WR / ELEC / 95 / 03-04. Dt 13/06/2003
|
|
|
|
|
|
|
| |
PVC Hood, Earth Tag, Stopping Plug, Reducers, Adaptors, etc are Available with Specified Diamensions, In Accordance to the Gland, Separately.
|
|
|
|
|
|
|
|
|
| |
a) Insert Part No.5, 3, & 4 Respectively on the Outer Sheath of the cable Before Exposing the Armour,
(b) After Removing Over Sheath of the Cable, Inserrt Part No. 3, Now Exposed Armour, Size the Armour length Accordig to washer & band the same, Again Insert Part No.3 & place on the Bended Washer, so as to Secured armour safely.
(b) Insert Part No.2 on Inner Sheath, Than tight Part No.2 with Part No.5,
(c) Finally Apply the full fitted Gland in the Enclosure with Entry Thread provided, if the Enclosure does not have thread than tight the gland with the part No.1 provided |
|
|
|
|
|
