|
|
| |
Flame Proof Glands are generally used in Hazardous Area, as well as in Normal Climatic Conditions also, which are also Weather Proof, Wtaer Proof & Dust Proof (IP 66). With the Protection of PVC Hood it can be used in Different Areas.
|
|
|
|
|
|
|
| |
1) Check Nut, 2) Washer, 3) Nipple Entry Part, 4) Neoprene Inner Rubber, 5) Armour Clamping cone, 6) Armour Clamping Ring, 7) Main Gland Body, 8) Neoperene Outer Rubber, 9) Skid Washer, 10) Gland Cover. As all the metal parts are made of brass, as per the Approved Drawing.
|
|
|
|
|
|
|
| |
CMRI No. CMRI / TC / P / H637,
BIS No. : CM / L 7462881. Endorsement
No. 1 Dt 25/ 01/ 05.,
CCOE No. : A / P / HQ / MH / 104 / 713 (P 116628)
|
|
|
|
|
|
|
| |
PVC Hood, Earth Tag, Stopping Plug, Reducers, Adaptors, etc. are Available with Specified Dimensios, In Accordance to the Gland, Seperately
|
|
|
|
|
|
|
|
|
| |
(a) Insert Part No.10, 9, 8, & 7 respectively on the Outer Sheath og the cable before Exposing the Armour,
(b) After Removing Over Sheath of the Cable, Insert Part No.6 over the Exposed Armour,
(c) Size Armour length, Life Armour, & Insert Part Facing Inward Side, Squeeze Part No.5, by pushing Part No.6, towards it,
(d) Insert Part No.4 & 3 on Inner Sheath, than tight Part No.3 with Part No.7, & Tight Part No. 10 with Part No. 7.
(e) Finally apply the full fitted Gland in the Enclosure with the Entry Thread Provided, if The Enclosure does not have thread than tight the gland with the check nut provided.
|
|
|
|
|
|
